Car Wash Tunnel Equipment
01020304
Advantages
01
2024-05-27
Efficient cleaning: The system uses high-pressure water sprayers and powerful brushes to quickly remove dirt, oil and dust from vehicle surfaces. The car washing time is usually 1-2 minutes per car, which greatly improves the cleaning efficiency.
Full coverage: The 14 brushes cover every corner of the car, including the roof, sides, front and rear bumpers, tires and more. Special tire brushes reach deep into tire crevices to remove hard-to-reach dirt.
01
2024-05-27
Intelligent control: The system adopts PLC electronic control system, which can automatically detect the size and shape of the vehicle, adjust the position and strength of the brush. The photoelectric sensor monitors the position of the vehicle in real time to ensure the safety and stability of the cleaning process.
Energy saving and environmental protection: The system adopts recycling water system to reduce the waste of water resources. Efficient cleaning reduces shampoo and wax consumption.
Friendly to users: The operation interface is simple and easy to understand, supporting multiple languages. The Conveyor Tunnel Car Wash Systems provide a variety of cleaning modes to meet the needs of different customers.
| Model | 14 Brushes Tunnel type Q14 |
| Machine Size (m) | L17.5*W4*H3 |
| Max. Car Size (m) | L≤unlimited*W≤2.3*H≤2.1 |
| Installation Size (m) | L30×W4.5×H3.2 |
| Suitable Cars | Sedans, SUVS, MPV, etc. |
| Wash Speed | 80-100 cars/hour |
| Water Consumption | 80-150L/Car |
| Foam Consumption | 7ML/Car |
| Water Wax Consumption | 12ML/Car |
| Electricity Consumption | 0.6KWH/Car |
| Power Supply | 380V/50Hz/50KW |
| Fan Drying Motor | SIX Groups drying motor: 45KW |
| Top Brush | 1 |
| Big Vertical Brush | 4 |
| Side Brush | 4 |
| Horizontal Wheel Brush | 2 |
| Dry brush | 3 |
01、Vehicle entry: The owner will slowly drive the vehicle into the car washing machine entrance, usually there will be signs or staff guidance. The Conveyor Tunnel Car Wash Systems recognizes the arrival of the vehicle through photoelectric sensors or other automatic detection devices and is ready to start.
02、Prewash stage: The tunnel car wash machine first uses a high-pressure water sprayer to initially rinse the vehicle to remove most of the dust and loose dirt on the body surface.
This step will help ease the load during subsequent cleaning and reduce the friction of the brush on the car paint.
03、Car wash liquid spray: The tunnel car wash machines spray special car wash liquid, which usually contains decontamination, lubrication and protection of car paint ingredients.
04、Scrubbing stage: 14 brushes begin to work, carefully scrubbing key parts such as the body, roof, and wheels. Brushes are EVA soft materials to reduce damage to car paint. At the same time, the brushes are adjusted according to the preset procedure and the shape of the vehicle to ensure that every corner is adequately cleaned.
05、High pressure washing: After the scrubbing is completed, the tunnel car wash machine again uses a high-pressure water sprayer to thoroughly wash the body to remove the residual car wash liquid and dirt.
06、Air drying stage: The tunnel car wash machines’ built-in air drying system starts to blow away moisture on the surface of the car body with strong wind.
The air drying process helps prevent the formation of water stains and streaks, keeping the car body dry and clean.
Pre-Sales and After-Sales Services
